PLEASE NOTE***** FOR MUCH CHEAPER FREIGHT AND MUST FASTER DELIVERY IT IS HIGHLY RECOMENDED THAT IF YOU REQUIRE FREIGHT THAT YOU HAVE THIS ITEM SENT TO A COMMERCIAL / BUISNESS ADRESS AS SENDING TO RESIDENTIAL IS VERY EXPENSIVE..

    Nissan patrol GQ tube rear bar, These bars are fabricated using CNC bent tube and laser cut parts then welded up in a jig to insure all bars are made consistent for a perfect fit to the rear of your patrol. The main tube size is 50 NB and the bracing tubes to the chassis are 40 NB. Both the tubes are 3 mm wall thickness. The bar has 2 recovery points that are 20 mm thick laser cut plate that a shackle can be attached to, All bars get sandblasted, Powder coat primed, Then powder coated. These bars offer great value for money, A very good departure angle, As well as great looks and maximum protection, To fit this bar you will require a rear quarter chop, And will need to weld two small bolt pads to the side of the chassis as you can see in the pictures, The other 4 mounting holes fit to existing factory bolt holes at the end of your chassis rail. We don't do any swing always or jerry can holders for this bar, and you will not need to remove your towbar! We can freight Australia wide please call or email me for a freight price. **this bar is to suit 2 inch body lift**